Stand-Up Battens

What are Knotwood Stand-Up Battens designed for?

Stand-Up Battens are engineered for floor-to-ceiling and wall-to-wall screen installations. The system uses a three-component assembly: a Base Plate fixed to the surface, a Batten profile (F) secured to the base plate, and a Batten Bracket (M) that clicks over to close and conceal the fixing. This produces a seamless, end-to-end screen with no visible hardware from top to bottom.

Can Knotwood Stand-Up Battens be fixed directly into a concrete floor?

Yes. The Stand-Up Batten base plate system is designed for fixing into concrete substrates. The system references AS 5216 (Post Design and Fastening into Concrete) and AS 4100 (Steel Structures Code) for fixing design. Engineering specifications are available for project-specific base plate sizing and fixing schedules. Stainless steel fasteners grade 304 or 316 must be used.

What is the maximum span Knotwood Stand-Up Battens can achieve?

Stand-Up Battens are engineered to span floor-to-ceiling or wall-to-wall without intermediate supports, making them suitable for large-scale privacy screens and security screening applications. Maximum spans depend on the specific batten profile selected and the substructure configuration. Engineering specifications are available for extrusion-specific span and load calculations; contact Knotwood’s technical team for project-specific data.

Are Knotwood Stand-Up Battens suitable for security screening applications?

Yes. The Stand-Up Batten system is specifically positioned for applications requiring enhanced security alongside screening, such as dividing spaces, securing perimeters, or screening unsightly areas in commercial and civic environments. The engineered base plate and bracket system provides structural rigidity beyond decorative batten screens. For security-rated applications, contact Knotwood for engineering documentation.

Are Knotwood Stand-Up Battens BAL-40 compliant?

Yes. Stand-Up Battens are tested to AS/NZS 3959 (BAL-40) and meet combustibility standards AS/NZS 1530.1 and AS/NZS 1530.3. The 6063 T6 extruded aluminium is non-combustible. The structural design standards referenced include AS/NZS 1170 series, AS 1664.1, AS 1720, AS 4100, and AS 5216, making Stand-Up Battens one of the most comprehensively engineered screening systems in the Knotwood range.

Is BIM content available for Knotwood Stand-Up Battens for architect specification?

Yes. Knotwood Stand-Up Battens have BIM content available through IGS BIM Solutions, including Revit families, advanced materials, custom appearance assets, and a virtual showroom. This allows architects and specifiers to integrate Stand-Up Battens directly into project documentation and design workflows. Bulk download options are available; contact Knotwood for access.

How does the Stand-Up Batten system differ from the Clip Batten system?

The key difference is the base plate. Stand-Up Battens use a dedicated base plate fixed to the floor or surface, which the batten then mounts onto vertically, creating a true floor-to-ceiling span. Clip Battens use a wall or substructure-mounted bracket and are better suited to wall-face screening applications. Stand-Up Battens are the right choice when you need a freestanding or structurally independent screen.

What spacing and profile options are available for Knotwood Stand-Up Battens?

Stand-Up Battens are compatible with a wide range of Knotwood batten profiles and can be spaced at equal intervals to suit privacy, ventilation, and visual requirements. Spacing, sequencing of different profile sizes, and colour combinations can all be customised. Base plates are available in two sizes: 25mm and 50mm, to suit the selected batten width. Engineering specifications confirm compatible profiles for each base plate size.