Panel Battens

What is a Panel Batten system and how does it differ from standard battens?

Knotwood Panel Battens combine the cladding board and batten bracket into a single pre-assembled system. Instead of fixing separate brackets and battens individually, each panel arrives with brackets already integrated, reducing parts and installation time. Compatible batten profiles clip onto the panel and lock into place with an audible click.

Can Knotwood Panel Battens conceal imperfections or uneven surfaces on existing walls?

Yes. Because Panel Battens install over the existing wall surface using a substructure such as top hat sections, metal hollow sections, or timber sections, they are effective at concealing imperfections, uneven plasterboard, and surface damage without requiring wall removal or remediation beforehand.

What batten sizes and profiles are compatible with the Panel Batten system?

The Panel Batten system supports Knotwood F-series profiles across four panel bracket configurations: KEBP259M (25x9mm bracket), KEBP2525M (25x25mm bracket), KEBP1359M (3-bracket 25mm), and KEBP5050M (50mm bracket). Compatible batten sizes range from 25x25mm through to 50x200mm depending on the panel selected. Refer to the Configuration Weight Table for span and load data.

How do I choose between the four Knotwood Panel Batten bracket configurations?

The bracket you select determines which batten profiles and sizes you can use. KEBP259M suits slim 25x9mm profiles. KEBP2525M accommodates 25x25mm square profiles. KEBP1359M is a three-bracket panel designed for heavier 25mm profiles requiring additional support. KEBP5050M suits larger 50mm profiles. Refer to the Weight Table for span limits and load specifications before selecting.

Can you mix batten and board colours on a Knotwood Panel Batten feature wall?

Yes. The Panel Batten system is specifically designed to allow different colours for the battens and the cladding board behind them. This creates a layered, two-tone visual effect that is not possible with standard single-component batten systems. Colour combinations can be selected from Knotwood’s available timber grain and powder coat finishes.

Are Knotwood Panel Battens made in Australia and what aluminium alloy are they made from?

Yes. Knotwood Panel Battens are Australian-made, resourced and produced from local supply chains. The profiles are extruded from 6063 T6 Temper Aluminium Alloy, which provides the strength and dimensional consistency required for architectural interior wall applications. Australian production also minimises lead times compared to imported alternatives.

How long does it take to receive a Knotwood Panel Batten order after placing it?

Knotwood Panel Battens are typically available within 2 to 3 weeks from order to dispatch. For large commercial projects or custom colour specifications, it is advisable to confirm lead times with the Knotwood team early in the project programme to avoid delays.

Are Knotwood Panel Battens a sustainable product choice for interior wall projects?

Yes. Knotwood Panel Battens are made from 100% recyclable aluminium with a VOC-free powder coat finish and non-chromate pre-treatment. This supports Green Star and environmentally conscious project specifications. At end of life, the aluminium profiles can be fully recycled, avoiding landfill disposal.